Z-Wave fibaro door sensor 2 white

• Fixed integrated temperature sensor
• Compact rounded design
• battery operation
• Sensor with magnetic contact
• tamper protection

The Fibaro door and window sensor is a battery-powered, Z-Wave compatible contact sensor. It combines two devices in one easy-to-use product (reed and temperature sensor). The sensor can be used to monitor the condition (open / closed) of doors, windows, window blinds or garage doors, etc. In addition, the integrated temperature sensor measures the temperature at the installation site and reports the value to the Z-Wave control panel. The product consists of two elements, a part of which is mounted on the moving part of the window or the door. The other part is fixed on the frame. The sensor must be included in the Z-Wave network by remote control or another Z-Wave controller. When an action is detected by the sensor, it sends a signal to the Z-Wave main controller. Compared to its predecessor, the Fibaro Door / Window Sensor 2 has a more compact and rounder design and the integrated temperature sensor. There is no free binary input available.

Fibaro is an intelligent building automation system made up of miniature modules that can be installed virtually anywhere in your home and are also compatible with any electrical system. However, the Fibaro devices are not permanently linked to the building infrastructure, so you can easily remove the modules from the wall and put them in another location when redesigning your home. Through the mesh network, the modules update their location after re-installation, resuming cooperation with the rest of the system components.

In terms of control and communication, the Fibaro system leaves nothing to be desired, as it is compatible with most mobile phones on the market and with wireless products from almost 300 different manufacturers. In addition, it is compatible with all major IP cameras and sends an image or video to your mobile phone as soon as an incident is reported.

Fibaro provides a simple configuration interface that allows you to change the relationships between individual devices, locations, and the complete control panel of any computer at any time without the need for any special software or technical service.

The Fibaro system can be integrated into an existing alarm system. Each system component can operate completely independently of the central unit. Should the central system be damaged and the system discovers eg a fire, each component decides for itself whether the shutters should be pulled up, the windows or doors opened, smoke ventilators should be started, etc. Best of all, there will be no VPN connection or static IP address needed to remotely control the system.