Molto Stain Stopper Tube 125 ml Range approx. 1 m2

Covers existing stains. Only one application necessary. Ideal for permanently isolating and covering water, nicotine, rust, lipstick, grease, soot and almost all felt-tip pen stains. Permanently prevents new penetration. Dries to a matt white. Easy to use thanks to the practical, integrated dosing sponge. Suitable for the following surfaces: Plastered surfaces, masonry, concrete, stone, plasterboard, chipboard, hardboard, wallpaper, fiberglass, woodchip and surfaces painted with emulsion paints. Application: The substrate must be sufficiently firm, stable, dimensionally stable and dry and free from layers that reduce adhesion, such as dust, dirt and loose particles. Prime sanding and chalking substrates with Molto Deep Primer. Knead the tube well before use, twist the sponge off the tube, remove the protective seal and twist the sponge back on. Hold the tube with the sponge upwards and press until the product appears on the sponge. Dab the product onto the affected area and spread evenly over the stain and slightly beyond. Treat stubborn stains a second time. After approx. 12 hours, the area can be painted or wallpapered over. Clean the sponge with a cloth after use and replace the cap. Tip: To achieve an optimum surface finish, spread Molto Stain Stop in one direction. Ingredients: polyvinyl acrylate resin, titanium dioxide, calcium carbonate, mica, feldspar, aliphatic hydrocarbons, additives. Coverage: approx. 1 m2

• Isolates or covers stains
• Permanently prevents new penetration
• Full coverage with the 1st application
• Easy to apply
• Can be painted and wallpapered over