Molto Mildew Stain Stop Tube 125 ml Range approx. 0.6 m2

Covers existing mildew stains. Only one application necessary. Specially developed to permanently cover mildew stains. Suitable for the following substrates: Plastered surfaces, masonry, concrete, stone, wallpaper and surfaces painted with emulsion paints. Can also be used directly on damp surfaces. The substrate must be firm and sound and free from layers that reduce adhesion, such as dust, dirt and loose particles. Prime absorbent and sanding substrates with Molto Deep Primer. Remove mold with Molto Mold Stop. Freshly plastered surfaces must first dry for 7-10 days before Molto Mildew Stain Stop can be applied. Application: Knead the tube well before use, twist the sponge off the tube, remove the protective seal and twist the sponge back on. Hold the tube with the sponge facing upwards and press until the product appears on the sponge. Dab the product onto the affected area and spread it evenly over the stain and slightly beyond. Finish the application by spreading Molto Stain Stop in one direction. After the area has dried, it can be painted over again. Molto Stain Stopper can be recoated after 12 hours. Clean the sponge with a cloth and replace the cap. Ingredients: acrylate resin, white spirit, cement, pigments, fillers and additives. Coverage: approx. 0.6 m²

• Prevents re-penetration
• Can also be used on damp substrates
• Ready to use
• Easy to apply
• Insulates or covers mildew stains permanently