Ansonic Radio Receiver EA 434-B-Mini 24V Learning Decoder

Before initial operation, delete all learned remote controls!

Normal operation:
The red LED flashes briefly every 10 seconds. The green LED lights up when a button on a learned remote control is pressed,

Learning a remote control button:
Press the learn button on the receiver briefly. The green LED starts to blink. As long as this
is audible or the LED is blinking, a remote can be learned. During the next 10 seconds, you can learn the button
of the remote control by pressing the desired send button. The green LED confirms the learned remote control buttons.
If a remote control button is already learned or the memory is full, the red LED flashes 3 times. In the version with
piezo buzzer, the learn button is pressed, and a signal tone starts. As long as this is audible, the remote can be learned.
Once the button is learned, the signal changes to a continuous tone.

Deleting learned remotes:
It is not possible to delete individual remote controls. During the deletion process,
all learned remotes are always deleted. To delete, press the learn button for at least 10 seconds. After a short
time, the red LED flashes at one-second intervals. In the version with piezo buzzer, the signal tone sounds. After releasing the button,
the red LED confirms the successful completion of the deletion process by flashing quickly.

Note: 11-pin socket {Art. 107111} for DIN rail mounting not included!

Scope of delivery

• EA 434 B / Mini receiver with 11-pin socket and
• antenna with connector
• instructions