Ansonic EA 434-N/Mini Receiver 12 bit 230 VAC KG C 11 pin plug-in socket

Operation Receiver EA 434

(Terminal assignment 11-pole, see Fig. 2)

Delete all taught-in handheld transmitters before initial commissioning!
Normal operation: The red LED lights up briefly every 10 seconds. The green LED lights up when a key is pressed on a taught-in hand-held transmitter key. Teaching-in a transmitter key: Briefly press the teach-in key on the receiver. The green LED starts flashing. As long as this is audible or the LED flashes, a transmitter can be taught-in. During the next 10 seconds, you can teach in the key of the handheld transmitter by pressing the desired transmitter key. The green LED confirms the taught-in hand-held transmitter keys. If the handheld transmitter key has already been programmed or the memory is full, the red LED flashes once.
In the version with piezo buzzer, the learn button is pressed and a signal tone starts. As long as this is audible, the transmitter can be learned. As soon as the key is learned, the signal changes to a continuous tone.

Deleting the programmed transmitters: It is not possible to delete individual handheld transmitters. During the deletion process, all taught-in transmitters are always deleted. To delete, press the learn button for at least 10 seconds. After a short time, the red LED flashes every second. In the version with piezo buzzer, the signal tone sounds. After releasing the button, the red LED confirms that the deletion process has been completed successfully by flashing quickly.

Scope of delivery EA 434-N/Mini receiver with 11 pin socket and antenna with plug, manual