Molto Fugen Frisch Bottle of 250 ml White

For refreshing old and grayed joints.
Complete set for refreshing old and grayed tile joints indoors. The set consists of ready-to-use white special paint, a brush and a sponge.

Can be used on tile joints. Not suitable for: non-porous joints in which plastics such as silicones or epoxies have been used, joints that have been treated and/or painted with water-repellent agents; non-glazed tiles or natural stone. Do not use outdoors.

Application:
Clean soiled joints very thoroughly with Molto Joint Cleaner or Molto Joint Cleaner with dosing sponge. Rinse with water. Repair damaged joints with Molto Tile Fix. Remove any mold growth with Molto Mold Remover or Molto Mold Destroyer. Allow joints to dry thoroughly for one day. Cover adjacent surfaces such as sanitary ceramics and non-glazed surfaces well. Molto Grout Fresh is ready to use. Shake well before use and apply evenly to the joints with a brush - allow to dry for approx. 30 minutes. Then wash off any remaining paint from the tile with a sponge and clear water.
Tip: The drying time may vary depending on the application temperature. The right time to remove the paint is when the paint in the joints has dried to a matt finish and the paint on the tiles is still shiny and damp. Proceed in sections! No post-treatment required.
For even better protection, treat the joints with Molto Joint Sealer.

Ingredients: Polyvinyl acetate dispersion, titanium dioxide, calcite, zinc sulphide, kaolin, water, glycol ether, additives, preservative.
Range: 8-12 m²

• Easy to apply
• Alkali-resistant
• Light resistant
• For interior use only