Value Non-contact voltage tester with flashlight

• For non-contact testing of AC voltages
• Displays 12 to 1000 V AC with simultaneous visual and acoustic voltage indication
• The bright flashlight for illuminating the work area can be used independently of the voltage tester
• The visual LED bar graph indicates the applied voltage - the higher the detected voltage or the closer the voltage source, the more LEDs light up
• Voltage indication with a bar graph of five lit LEDs for easy interpretation/reading
• The acoustic voltage detector beeps at a higher frequency the higher the voltage or the closer the device is to a voltage source
• Automatic shutdown conserves battery and extends battery life
• Screw-on battery cover with O-ring prevents dust and water ingress
• Lightweight, compact tool with pocket clip can be conveniently stored and is quickly at hand
• IP67: Dustproof and waterproof
• Drop protection 2 m
• Protection rating CAT IV for 1000 V

Special features: Deep pulsing tone with 50 – 500 Hz; blue LED goes out and red LED blinks (approx. 2 times per second)
Degree of contamination: 2
Voltage: 12 - 1000 V AC
Frequency: 50 – 500 Hz
Standard: CAT IV (1000 V)
Protection class: IP67: Dustproof and waterproof
Overall length: 148.0 mm
Overall width: 18.3 mm
Overall height: 29.4 mm
Weight: 34.0 g
Drop protection: 2 m
Batteries: 2 x AAA (1.5V)

Before use or maintenance, all warnings, caution notes, safety information, and instructions in this manual must be read, understood, and followed. Failure to do so can result in serious and life-threatening injuries.

Never assume that neutral and ground wires are de-energized. Neutral wires in multi-conductor circuits may still be live even when disconnected and must be tested again before they can be touched.