Proxxon TSG 250/E disk sander

Grinds longitudinal edges, end edges, curves, mitres and precise flat surfaces at right angles.

For processing softwood, hardwood, non-ferrous metal, steel, plastic (including Plexiglas and GRP), cork and rubber. Clear table for preselecting the correct sanding speed.

Sturdy construction:
Main housing made of ribbed die-cast aluminum (no tubular steel or sheet metal construction). Face-turned sanding plate with silicone film: This ensures that bonded sanding discs can be removed effortlessly after use. The scope of delivery also includes two square silicone films for storing and replacing used sanding discs. With suction nozzle for connecting a vacuum cleaner for dust-free work. Complete with angle fence and 2 sanding discs each with 80 and 240 grit.

Technical data:
220 - 240 volt drive via toothed belt (reduction ratio 7.3:1). Electronically adjustable sanding speed of approx. 250 - 750 m/min. Sanding disc Ø 250 mm, max. sanding height 135 mm. Table 275 x 105 mm (adjustable by 45° downwards, 15° upwards). Size (without table) 330 x 280 x 230 mm.

250 mm sanding plate. Machined with diamond tool. Double ball bearings.
Table (275 x 105 mm) with continuous groove for angle fence. Can be tilted up to 45°.
Material: Main housing: ribbed die-cast aluminum; sanding disc: die-cast aluminum with bonded silicone film

• Sands longitudinal edges, end edges, curves, miters and precise flat surfaces at right angles on a turnaround
• For processing softwood, hardwood, non-ferrous metal, steel, plastic (including Plexiglas and GRP), cork and rubber
• Clear table for preselecting the correct sanding speed
• With suction nozzle for connecting a vacuum cleaner for dust-free work
• Adjustable by 45° downwards, 15° upwards