Led Lenser Flashlight MT14

Ledlenser MT14

The new, rechargeable Ledlenser MT14 flashlight is a compact lighting wonder. With a light output of up to 1000 lumens and an enormous light range of 320 meters in the smallest of dimensions, it is the ideal flashlight for any outdoor trip. The highlight: with the practical speed charging function, it is ready for use again in no time at all.

Key facts and features

Maximum light output: 1000 lumens1

Low power consumption: Up to 192 hours runtime2

Long light range: up to 320 meters1

Withstands any weather: splash-proof (IPX4)

Low weight: only 253 grams

Speed charging function: 80% battery charge after just 240 minutes, 100% after 480 minutes

Built-in temperature control: overheating protection

Innovative front switch: lamp can stand upright and be used as a room light

Intelligent control: all SLT light functions (Power, Mid Power, Low Power, Strobe) can be selected with a soft transition at the touch of a thumb

Battery status display and charge indicator in the front switch

Simple operation: quick switching and focusing with one hand!

Smooth fading up and down of the light

Transport lock : no unintentional switching on in luggage

Light functions

Power function: high light output for every situation

Mid-power function: Energy-saving bright light

Low power function: Economical light for long runtimes, glare-free reading and working

Technologies

Smart Light Technology: Individually programmable push-button and switching combination

Advanced Focus System (AFS): Infinitely adjustable near and far light

Rapid Focus: For lightning-fast change of light mode (focusing/defocusing)

Speed Charging function: 80% charge after just 240 minutes. 100% after 480 minutes

Temperature Control: Protects wearer from burns and LED from overheating

Technical dataLuminous flux: 1000 lmLight range: 320 mLight duration: 192 hCharge duration: 480 minLength (defocused): 151 mmHead diameter: 39 mmWeight without battery: 152 gPower source: rechargeable battery (1x Li-ion 3.7V)1Measured values according to ANSI FL1 in the setting specified in each case. If no setting is explicitly stated, the values for luminous flux (lumen/lm) and light range (meters/m) refer to the brightest setting and the values for light duration (hours/h) refer to the lowest setting. A boost function (if available) can be used several times, but is only available for a short time. If the lamp is equipped with colored LED(s), the measured values are indicated with white light or the white LED. If the lamp has different energy modes, the "energy-saving mode" is the basis for the measurement.