Led Lenser Flashlight TT

Ledlenser TT - lasts longer and shines brighter.

Tactical and efficient: The Ledlenser TT works reliably and with a long service life of up to 25 hours.1 Its robust housing with a particularly non-slip surface structure also sits comfortably in the hand and is highly resistant to shocks and splashing water. Together with the wrist strap and the practical roll protection ring, which are included in the scope of delivery, it is a real all-round talent.

Key data

Brightness 280 lumens1Light duration 25 hours1Light range 220 meters1Length: 116mmWeight: 132 gPower source: Battery 3x AAA 1.5VLight functions

These settings bring bright joy:

Power - high light output for every situationLow Power - economical light for long runtimes, glare-free reading and workingSwitch

Turn, press or both - this is how you switch on this Ledlenser:

End Cap Switch - a switch at the handle end of the lamp (end cap)IP class

Strong resistance to water and dust:

IPX4 - protection against splashing waterHousing material

Every Ledlenser housing is made of high-quality metal to ensure that you can enjoy your lamp for a long time. In this case made of aluminum for particularly easy handling.

Advanced Focus System

Galileo swore by the power of the lens, Newton by that of the reflector. Ledlenser has simply combined both technologies - but more perfectly than anyone before. The result: Ledlenser's patented Advanced Focus System (AFS), which enables a smooth transition from homogeneous close-up light to sharply focused long-distance light. The AFS has an efficiency that even impresses experts.

Rapid Focus

When focusing and defocusing a flashlight, the reflector moves relative to the lens. Conventional mechanisms achieve this by rotating the lamp head. However, because Ledlenser finds this technique too slow and impractical, they have developed the Rapid Focus: A sliding carriage mechanism that allows you to change the light mode at lightning speed - with one hand.

Temperature Control

Hard work leaves LED Lenser lamps cold: A Ledlenser never gets too hot, no matter how hard you use it. This protects the user from burns and the LED from overheating.

1Measured values according to ANSI FL1 in the setting specified in each case. If no setting is explicitly stated, the values for luminous flux (lumen/lm) and light range (meters/m) refer to the brightest setting and the values for burn time (hours/h) to the lowest setting. A boost function (if available) can be used several times, but is only available for a short time. If the lamp is equipped with colored LED(s), the measured values are indicated with white light or the white LED. If the lamp has different energy modes, the "energy-saving mode" is the basis for the measurement.