HomeMaticIP dimming actuator flush-mounted phase section 3 - 80 VA for resistive and capacitive loads - Optimized for modern bulbs and small loads
- Fully electronic phase section dimmer
- Low quiescent current consumption
- Compact design
- Screwless terminals
- For dimmable LEDs and energy-saving lamps, low-voltage halogen lamps, HV halogen lamps and incandescent lamps
The fully electronic phase-section dimmer HmIP-FDT enables the dimming as well as the switching on and off of ohmic and capacitive loads. These include dimmable LEDs, dimmable energy-saving lamps, low-voltage halogen lamps, HV halogen lamps and incandescent lamps. It is optimized for modern light sources such as LEDs and thus especially for small loads of 3? 80 VA particularly well suited. The Homematic IP App allows connected luminaires to be dimmed almost infinitely in 0.5% increments. Furthermore, it impresses with its low quiescent current consumption of 0.4 W and its compact design for easy installation in flush-mounted boxes or in surface-mounted distribution boxes for use in basements or outdoors. Screwless terminals facilitate assembly. It is controlled via the Homematic IP App, Homematic IP transmitters or via the Homematic CCU2 central unit.
|
| system communications | radio
|
| protocol | IPv6
|
| radio frequency | 868.3 MHz
|
| product type | dimming
|
|
| Reach max. | 180 m
|
| depth | 54 mm
|
| width | 33 mm
|
| length | 41 mm
|
| mass | 31 g
|
|
| Operating temperature max. | -10 - 55 ° C
|
|
| power supply | mains operation
|
| Last Max. | 80 VA
|
| Last Min. | 3 VA
|
| Power consumption operation | 0.4 W
|
| input voltage | 230V
|
|
| Dimming Art | trailing edge
|
|
| colour | Gray
|