Eldat RCJ33 Flush-mounted receiver 868 Mhz 1 channel low voltage

The RCJ33 bidirectional flush-mounted receiver is used for potential-free switching of low-voltage loads with a changeover contact. Up to 32 transmitters can be taught-in. A button input is also available for wired operation. Programming is carried out simply by pressing a button on the device or via radio using remote learning (POTA). In addition to the ON/OFF function, the LOGIC, TOTMANN and TIMER operating modes (adjustable from 1 second to 30 hours) can be used. The flat design facilitates installation in flush-mounted boxes, behind switches or behind sockets.

Technical data

• Easywave neo coding
• Up to 32 transmitters can be programmed.
• POTA
• Frequency 868.30 MHz
• Channels 1
• Power supply 12-24 V AC/DC
• Power consumption (at 24 V AC) 0.2 W Stand-by
• 1.0 W Relay switched (without load)
• Operating modes ON/OFF (2-button operation)
• ON/OFF (1-button operation)
• TIMER (adjustable)
• LOGIC
• TOTMANN
• Input 1 external push-button
• Output 1 potential-free relay contact (changeover contact)
• Max. Contact load AC: 60V / 1A / 60VA
• DC: 30V / 1A / 30VA
• Operating temperature -20 °C to +45 °C
• Dimensions 43 x 42 x 17.5 mm

Scope of delivery

• Flush-mounted receiver
• Operating instructions