Eldat RCJ35 Flush-Mount Receiver 868 MHz 1 Channel 230 V potential-bearing

Technical Data

With the bidirectional flush-mounted receiver RCJ35, a 230V tubular motor can be controlled via radio or through push-button inputs. The runtime of the motor can be set separately for each direction of travel.
The operating modes available are 1-button, 2-button, and 3-button operation.
In the 2-button and 3-button operation, a blind operation with slat adjustment is also possible. Programming is easily done on the device by pressing a button or via radio using remote learning (POTA).
The flat design facilitates installation in flush-mounted boxes, behind switches, or behind sockets.

• Coding Easywave neo
  Up to 32 transmitters can be learned
  POTA
• Frequency 868.30 MHz
• Channels 1
• Power supply 230 V AC, 50 Hz
• Power consumption 0.4 W standby 0.8 W relay switched (without load)
• Operating modes ON/OFF (2-button operation)
  ON/OFF (1-button operation)
  TIMER (adjustable)
  LOGIC
  DEADMAN
• Input 1 external button
• Output 1 potential-free relay contact (normally open)
• Max. contact load
  resistive load: 10 A / 2300 VA
  inductive load: 3 A / 690 VA
• Operating temperature -20 °C to +45 °C
• Dimensions 43 x 42 x 17.5 mm

Scope of delivery

• Flush-mounted receiver
• Operating manual