Alternativ RO5 water treatment plant reverse osmosis

-The first pre-filter is equipped with a 5 µm cartridge made of polypropylene foam. It removes mechanical impurities such as sand, mud, rust and lime particles from the water and increases the lifetime of the next filter cartridges.
-The second stage of filtration is a block filter with activated carbon cartridge. It removes chlorine, pesticides and many organic impurities.
-The next filter contains 1 µm cartridge made of polypropylene foam. It filters smaller mechanical water impurities and possible carbon particles.
-The osmotic membrane (fourth stage) removes 96-99% of all dissolved in water pollutants, as well as bacteria and viruses.
-The final carbon filter removes suspended solids and gives the water characteristic taste of natural spring water.

Filtration capacity of TFC membranes:

• Aluminum:88% - 99%
• Ammonia:86% - 92%
• Chromium:96% - 98%
• Cyanide:92% - 98%
• Zinc:94% - 97%
• Cadmium:98% - 99%
• Manganese: 96% - 98%
• Copper :95% - 99%
• Nickel:95% - 99%
• Lead :96% - 98%
• Silver :86% - 98%
• Strontium:87% - 90%
• Iron :98% - 99
• Pesticides:99% - 100%
• Bacteria :99% - 100%

Accessories:

The following accessories are supplied complete with the device:

• An ergonomic silver faucet that can be mounted on the sink or wash basin.
• Universal metal connector with ball valve and hose, it allows easy and quick connection of the filter to the water supply pipe.
• The universal bowl for filter housing (necessary when replacing cartridge).
• The Teflon tape is used to seal the threaded connections.
• Water storage tank

Reverse osmosis systems remove up to 99.8% of all pollutants from water. The core of the UO systems is a multi-layer thin-film membrane TFC, which together with the pre-filters allows to achieve the purest water, free of heavy metals, chlorine, bacteria and viruses.
The filtered water is comparable in purity only with a few natural sources.

Specification:

• Type of connections. Quick connectors (JG)
• Membrane TFC (thin film) Dow Filmtec 75 GPD
• Flow rate (24 hours) up to 285 liters
• Ceramic water tap
• Minimum discharge - >90
• Tap water pressure - 2,75 - 5,85 bar
• Water temperature - 2°C - 40°C
• Pre-filter ? 5mµ
• activated carbon filter- 10?
• Prefilter - 1 µm
• Membrane 75 GPD
• Final filter - activated carbon cartridge made of coconut shells
• Reservoir tank- 5,8,10,12 or 15 liters

On request with permeate or booster pump, energization, vitalization, miniralization, Grander or rock crystals