Xyladecor Douglas fir oil 5 L

Product quality: Mild-smelling maintenance oil for the protection and refreshing care of Douglas fir wood.

Areas of application: Xyladecor Douglas fir oil is the ideal protection for Douglas fir wood in outdoor areas such as garden parquet, wooden decks, screens, pergolas, etc.

Product quality:
Impregnated, water and dirt repellent
Even, silky surfaces
Penetrates deeply
Weather protection - effective protection against moisture and UV rays
- Penetrates deeply, provides deep care
- Repels water and dirt
- Refreshes the color of old and already greyed wood surfaces
- enormous coverage
- produces even, silky surfaces
- easy to apply
- impregnated: beading effect protects the wood from moisture
- quick drying, completely dry after just 24 hours

Coverage: approx. 22 m2 with 1 coat, depending on the type of wood and absorbency.


How to oil correctly:
1 Read the instructions on the packaging carefully before use.
2 Cover the work area with foil or paper. Brush or wipe off dust and dirt from the workpiece.
3 Clean the wood (e.g. with soapy water), allow to dry and sand lightly with sandpaper or sanding fleece if necessary. Do not inhale sanding dust, wear a dust mask. For grayed wood, we recommend the use of Xyladecpr Teak Cleaner or Wood Cleaner and Graying Remover to restore the natural wood tone.
4 Shake and stir Xyladecor Douglas Fir Oil well before use.
5 Apply thinly and evenly with a flat brush or a clean, soft cloth. Ensure good ventilation during application.
6 Allow the 1st coat to dry for at least 5 hours. Then apply 1 further coat. A 3rd coat is recommended to achieve particularly attractive surfaces on old wood.

Cleaning
Clean brush with turpentine substitute after use. Always keep the can tightly closed after use.
Allow cloths soaked with Douglas fir oil to harden outdoors and dispose of them.


Wood types: Particularly suitable for Douglas fir wood but also for other wood types such as e.g. eucalyptus, oak, robinia, cedar.


Tip: A single application is sufficient to freshen up wood surfaces that have already been oiled. Then allow to dry for 24 hours.

Advice
Maintenance with oils is quick and uncomplicated:
To refresh already oiled wooden surfaces once a year, simply spread the oil evenly over the wood with a brush and leave to dry.


Coverage: approx. 29 m2 /L with 1 coat, depending on the type of wood and absorbency.

• Impregnates water
• Dirt repellent
• Weather protection
• Even, silky surface
• Penetrates deeply