WTS Hand transmitter S10-868A4K05

WTS K05-Keeloq Version: 4 channel 868 MHz

The WTS S10-868A4K05 works according to the modern KeeLoq process. A new code is calculated with each actuation. With normal use, it takes over 20 years for a code to repeat itself!

Please note the following with this Keeloq hand transmitter:

The WTS hand-held transmitter K05 is only compatible if your current hand-held transmitter also has the designation K05. If you have a handheld transmitter with the designation ...K00, K01, K02, K03 or K04, the K05 is NOT compatible as this handheld transmitter has a different Keeloq. However, you can delete your radio receiver and program the K05 in your system. However, your existing hand-held transmitters with the designation K00-K04 will then no longer work.

Highlights:

• LED for battery and transmission control
• Only compatible with WTS 868MHz AM radio receivers with Keeloq coding
  
• Registration and fee-free! Approval according to ETS 300 220
• KeeLoq coding K05

Please note that despite the same frequency, coding type and appearance, a radio remote control can have completely different technical properties. Manufacturer and model form the basis. Of course, we point out compatible, tested hand-held transmitters and alternatives in our shop.

Technical specifications:

• Model: S10-868A4K05
• Manufacturer designation: S10-4K
• Transmission Frequency: 868.300MHz; Amplitude Shift Keying ASK
• Transmission channels: 4
• K05 version: KeeLoq, hopping/changing code
• Transmission range: up to 75 m in free field
• Operating voltage: 12 V battery alkaline manganese type 23A
• Current consumption: typ. 20 mA in transmission mode
• Operating temperature: -20° C to +60° C at 30% to 80% rel. humidity
• Dimensions: 82 mm x 39 mm x 17 mm Plastic case, black-grey
• Weight: approx. 40 g including battery and packaging
• Battery: included
• Attention: Only compatible with WTS 868 MHz AM radio receivers with Keeloq coding
  

Scope of delivery:

• 1x WTS hand transmitter S10-868A4K05
• 1x battery
• 1x operating instructions