Simpson Strong-Tie Gerber connector GERW200-B

The GERW Gerber connectors are suitable for the joint formation of butt jointed continuous girders, in addition to transverse forces in the vertical and horizontal direction, they can absorb forces in the direction of the rod and are therefore suitable for transferring union forces, depending on the load, you can choose between partial and full nailing Occurring tensile forces (FN, d) always choose partial nailing, the type designation corresponds to the height of the connector, for a given purlin height a set of connectors is used that is 20 mm smaller than the purlin height, but 100 and 125 mm for the purlin heights Type GERW 90 is used, steel quality: S 250 GD + Z 275 according to DIN EN 10346, corrosion protection: 275 gm2 on both sides - corresponds to a zinc layer thickness of approx. 20 ?m, advantage: load transfer in all three directions, optimized load-bearing capacities for full and partial nailing , single dimension suitable for several wood cross-sections - saving storage space , Support: wood, wood-based materials, component to be supported: wood, wood-based materials, area of application: coupling purlin connection for wood cross-section heights of 90 to 420 mm

Packing unit: 15 pieces.