Rode Microphones NTG-4 + shotgun condenser microphone

The NTG4 + locates within the RØDE program exactly between the classic NTG-2 and the top model NTG-3. Self-noise and sensitivity were again significantly improved compared to the NTG-2. An absolute novelty is the integrated lithium battery, which allows operation without phantom power, and even a battery change is no longer necessary. The battery life is more than 150 hours, with the included MicroUSB cable, the NTG4 + can fully recharge within two hours. Of course you can operate the NTG4 + with phantom power, while the battery is not charged or charged. New are the electronic switch buttons on the microphone housing, with which pre-attenuation, high-pass filter and - also a novelty for shotgun tubes - can activate a presence increase. The latter is ideal to compensate for the inevitable fall in height when using a fur windshield already in the microphone. The switch buttons each have a status LED, in addition the NTG4 + "remembers" the last used settings after work has been completed. At the next use they are immediately available again. Acoustic Principle Line Gradient Capsule 0.50 "Directional Characteristic Supercardioid Input Direction End Transmission Range 20Hz - 20kHz (HPF @ 75Hz Adjustable) Output Impedance 200 Boundary Sound Pressure Level 135dB (@ 1kHz, distortion factor of 1% at 1k?) Sensitivity -32.0dB re 1 Volt / Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Noise (A-weighted) 16dB-A Power + 48V phantom powerInternal battery Noise (A-weighted) 176gm Dimensions 278mmH x 22mmW x 22mmD Output XLR Output Included: - NTG-4 + - RM5 Robust microphone holder - ZP2 Padded zipper case (large) - Windshield for NTG4 & NTG4 + - Micro USB cable