Pattex Kraft-Mix Extreme Solid 6 g syringe of 2-component adhesive

Main properties: Can be applied in 5 minutes Non-yellowing Resistant to rinsing Material / areas of application: Porcelain and glass Metals, stone and wood Many plastics (thermosets, glass fiber reinforced plastics, rigid PVC, ABS, etc.) Concrete, marble, rubber, Styrofoam® and much more. Description: Pattex Kraft Mix Extrem Fest is a high-quality 2-component epoxy resin for particularly high-performance and demanding bonding under the highest loads. Application: The hardener tube is fitted with a childproof cap. To open the tube, press the cap onto the tube and twist at the same time. Apply equal quantities of resin and hardener (strands of equal length and thickness, mixing ratio 1:1) to the mixing tray and mix thoroughly with a spatula. Apply a thin layer of adhesive to both bonding surfaces. Fit the parts together precisely without pressing and fix with a clamp, adhesive tape or similar until at least the initial adhesion is achieved. Available as: Tubes 11ml/12g Syringe 11ml/12g Further information: Mixing ratio 1:1 Versatile For interior and exterior use, resistant to ageing Fills gaps, evens out uneven material Impact-resistant Can be drilled, filed and painted over High resistance to water, alcohol, petrol, fuel mixtures, oils and greases, diluted acids and alkalis as well as many solvents Can be applied in 1 hour Hand strength after approx. 3 hours Final strength after approx. 24 hours (200kg/cm² Temperature resistant from -30°C to +150°C Syringe: 5 minutes workable Hand strength after approx. 15 minutes Final strength after approx. 2 hours (140kg/cm²) Temperature resistant from -20°C to +80°C Not suitable for: Bonding of car mirrors to the windshield, bonding to large glass surfaces, PE, PP, PTFE (e.g. Tefolon ®).

• For high-performance and demanding bonds
• Versatile and resistant to ageing
• Extreme final strength
• Transparent coloring
• Also suitable for damp rooms