Extremely small, lightweight data logger
that records all data available on the MULTIPLEX Sensor Bus (MSB) to a microSD card. The data is saved in .csv format and transferred to a PC via the microSD card (microSD USB card reader included). The data can then be viewed and analyzed using Microsoft Excel or LogView (). The FlightRecorder is connected in the model to the sensor port (“S”) of a telemetry-capable M-LINK receiver or to any sensor.
Recording time of at least 100 hours
with a 2GB microSD card, using the maximum data volume and maximum number of sensors. The card can be replaced at any time with a larger, commercially available microSD card.
Start/stop recording
Can be controlled via the transmitter, or set to start/stop automatically when switched on or off.
Flight path display using GPS data in Google Earth
Export data via LogView in “.kml” format for Google Earth. Available with MULTIPLEX GPS # 8 5417, version 1.30 or later.
Can be used as a data logger in the transmitter
The FlightRecorder can also be used as a telemetry data logger in the transmitter. In this case, the FlightRecorder is connected to the “COM.” interface on the HFM3, HFM4, HFMx V2, HFMG, or COCKPIT SX M-LINK. However, only when used in the model as a true FlightRecorder is gap-free data recording at the maximum telemetry or sensor data rate guaranteed. The FlightRecorder can also be used in the transmitter at the same time as the Telemetry Display # 4 5182!
“Standalone operation” possible
The FlightRecorder can also be operated without an M-LINK system (receiver and transmitter). In this case, data from directly connected sensors is recorded (e.g., in models without 2.4 GHz or with third-party RC systems, or outside of model sports, such as during hikes, bike rides, etc.)