Marantec Radio receiver from socket receiver Digital 993 868 MHz 1 channel bilinked

The integrated socket enables the universal receiver to be plugged in as an adapter plug in front of the drive's power cable. The socket receiver Digital 993 is plugged directly into a socket and supplied by it. The power cord of a drive can be plugged into the socket receiver like an adapter plug. No additional socket is required. A potential-free output on the receiver is connected to the switching input of the drive. When a transmitter button is pressed, the output is switched briefly. Up to 200 radio telegrams can be taught into the unidirectional universal receiver. Old Marantec drives or third-party drives can be converted to the current bi · linked radio with the frequency of 868 MHz.

description

• 1 channel for free assignment
• PULSE function
• 1 potential-free relay contact for switching an electrical device, e.g. pulse input of a garage door drive
• Power supply via standard mains socket without blocking it
• For all Marantec drive systems and third-party products

Technical data of the radio receiver

• Dimensions (WxHxD) (housing) 50x120x75 mm
• Nominal voltage: 230 V AC
• Power consumption stand-by: approx. 1 W
• Degree of protection: IP 20
• Temperature range:? 10 ° C to +35 ° C
• Radio technology: bi · linked
  
• Storage locations: 200
• Outputs: 1 potential-free relay contact
• Max. Contact load: 24 V DC / 1 A, conventional cabling

scope of delivery

• Socket receiver 1-channel bilinked
• Connection cable, 10,000 mm