28-Port Smart Managed PoE Gigabit Stack Switch - Layer 2 management and security with Layer 3 features - Industry-standard CLI, console port, and web interface - Physical stacking with 10G SFP+ - Static routing and MSTP
Fully equipped with management features for Layer 3 traffic
The DGS-1510 family offers advanced network management features accessible via an industry-standard CLI, serial console port, or web interface. This gives your network features such as VLANs, Multiple Spanning Tree Protocol (MSTP), Link Aggregation (LACP), static routing, multiple firmware images, and multiple configuration files.
The DGS-1510 series switches are equipped with security features such as IGMP Snooping, Access Control Lists, port security, and the unique D-Link SafeGuard Engine, which protects your network from malicious DoS attacks caused by broadcast, multicast, and unicast flooding. This makes them a versatile solution for enterprise networks.
With their 10G SFP+ ports, the DGS-1510 series is particularly well suited for use at the core of small and medium-sized business networks with typical 10G uplinks and 10G servers. In medium to large enterprise networks, they can serve as a connection between core and edge switches.
10 Gigabit SFP+ stacking
Combine up to six devices and 288 Gigabit ports into a physical stack using direct-attach cables or any compatible SFP+ transceivers. You can choose between a fail-safe ring or a linear topology. The remaining uplink ports are available for other functions and provide 10 Gigabit connections for the core network and servers.
28-Port Smart Managed PoE Gigabit Stack Switch 2x 10G, dlink|green 3.0
24x 10/100/1000 Mbps TP (RJ-45) PoE ports, 802.3at Power over Ethernet delivering up to 30 watts per port, 2x 1000 Mbps fiber (SFP) slots, 2x 10 Gbps fiber (SFP+) slots for uplink or stacking, 40 Gbps full-duplex stacking bandwidth, up to 6 devices in a ring stack, 16K MAC addresses, 802.3x Flow Control, 802.3ad Link Aggregation and static trunks, up to 8 ports in up to 32 groups, jumbo frames up to 9000 bytes, 802.3az Energy Efficient Ethernet (EEE) port power-saving mode when idle, automatic and scheduled power-saving mode for unused ports, scheduled automatic LED shutdown, scheduled PoE, scheduled automatic system power-saving mode, reduced power consumption, lower heat output, longer service life, 802.1D and 802.1w Rapid Spanning Tree, 802.1s Multiple Spanning Tree, Loopback Detection, 802.1Q VLAN support with up to 4K static groups, GVRP, traffic segmentation, 802.1p port-based priority control with 8 queues, automatic voice and camera VLAN, IGMP v1/v2 Snooping and v3 Awareness, MLD v1 Snooping and v2 Awareness, bandwidth management, ACL
802.1x port-based access control (RADIUS), port security with up to 512 static MAC addresses per port, D-Link SafeGuard Engine, broadcast storm control, port security, DHCP server screening, ARP spoofing prevention, up to 64 (IPv4) or 32 (IPv6) static routes and a default route, full IPv6 support, single-IP management for up to 32 devices, web-based management, SmartConsole Utility, command-line interface (CLI), TELNET, console port, SNMPv1/2c/3, SSH, SSL, LLDP, LLDP-MED, port mirroring, cable diagnostics, 193 W PoE budget, operating temperature up to 50°C, 2x smart fans, rack-mountable