JCM EasyTec JCM Radio receiver from radio receiver WAVE 500-2

With the 868.350 MHz radio receiver WAVE 500-2 from JCM you can manage 868.350 MHz hand-held transmitters, the 13.56 MHz proximity technology and the JCM hand-held transmitters with dual technology (radio and proximity). The device is available in 230 VAC and in 2 potential-free relays. The receiver also has a connection with a proximity reader.

Applicable for: roller gates - swing gates - sliding gates - swing gates - sectional gates - drop gates - revolving doors - folding gates - glass doors - barriers - Pöller

Technical data of the radio receiver:

• 868.350 Mhz receiver, 2 relays, 500 memory locations.
• Outputs: The relays can be reprogrammed with the soft assistant. Relay 1 can work in pulse mode and relay 2 can work in pulse mode or as a bi-stable relay.
• Additional outputs: 2.
• Removable memory 500 codes.
• Power supply: 230V with jumper.
• Idle / operating current consumption: 60mA / 90mA.
• A maximum of 3 proximity readers can be operated at the same time on the BUS-LIN data interface.
• BUS-LIN cable length: Cable cross-section for the following cable lengths: 100/150/200 m. 0.22 / 0.35 / 0.5 mm2 (category 5 is recommended).
• Up to 20 proximity readers can be operated simultaneously on the same BUS-LIN.
• Operating temperature: -20ºC to + 85ºC.
• Built-in antenna.
• Learning the code yourself or using programming aids.
• IP54 (IP 65 with cable entry plug).
• Dimensions: 160 x 140 x 48 mm.