Hagor Dual ceiling bracket HA DH Duo S

The HA DH Duo S is a ceiling mount for two screens "back-to-back" with 32" to 50" | 81 - 127 cm screen diagonal.

It can be mounted in either landscape or portrait orientation. The VESA mounts are already included and can be fitted from min. 100 x 100 mm to max. 400 x 400 mm.

The tilt angle of the TV mount can be adjusted without tools using the side turning handles. The possible tilt angle depends on the size of the installed screens (-5°/+30° max.).

Thanks to the lateral slotted hole in the lower tube segment, the mount can be swiveled by ±15° on the installation side and thus also compensate for slight differences, e.g. in the event of incorrect drilling. The ceiling distance can be varied in 100 mm increments between min. 438 mm and max. 738 mm. This specification refers to the center of the screen.

Cables are routed internally, concealed from view and unwanted access. A cover ring for suspended ceilings is included in the scope of delivery and ensures a clean appearance.

The surfaces of the HA DH Duo S are finished with an impact- and scratch-resistant black powder coating.

The maximum load capacity is 2x 35 kg.