Eldat DIN rail receiver Easywave neo 230V 2x NO contact potential-free

The bidirectional RCR02 2-channel top-hat rail receiver is used for potential-free switching of two mains voltage consumers and can be operated with transmitters in 1-button and 2-button operation. 32 transmission codes can be programmed for each switching output. In addition, an Easywave neo server can be taught into the receiver in order to use the bidirectional functions. The receiver can be operated in the ON/OFF, IMPULSE and TOTMANN operating modes. TIMER functions and a LOGIC function are also available in ON/OFF mode. The device is designed for mounting on a standard top-hat rail (35x7.5 mm).

Technical data

• Easywave Easywave neo coding
• 32 transmitters can be programmed per output
• 1 Easywave neo server can be programmed
• Frequency 868.30 MHz
• Channels 2
• Power supply 230 V AC, 50 Hz
• Power consumption 0.4 W stand-by
• 1.2 W max. without load
• Operating modes ON/OFF (1-button operation)
  ON/OFF (2-button operation)
  IMPULSE
  TIMER fixed (3 and 7 minutes)
  TIMER individual (per transmitter)
  TIMER global (per output)
  TOTMANN
  LOGIC (2-button operation)
• Outputs 2 potential-free relay contacts (NO contact)
• Max. Contact load
  Resistive load: 16.0 A / 3,680 VA
  Inductive load: 3.0 A / 690 VA
  Non- or series-compensated fluorescent lamps: 3.0 A / 690 VA
  parallel-compensated fluorescent lamps: 3.0 A / 720 VA
  Capacity ECG: 4.0 A / 920 VA
• Operating temperature -20 °C to +45 °C
• Dimensions (W/L/H) 35/90/63 mm

Scope of delivery

• DIN rail receiver
• Operating instructions