DTM PIKO150 Radio receiver 433 MHz 1 channel 12-24V

PIKO is a 1-channel receiver in a miniature housing. It is characterized by very simple operation and high functionality at the same time. Its small dimensions allow it to be installed in almost any device, and thanks to the wiring harness and opening for the cable tie, installation is quick and easy. The receiver is designed to work with door control units, roller shutters and other automation devices.

Highlights:

• small size
• Can be installed using connection cable
• Easy operation
• Superheterodyne receiver
• NO relay output
• Power supply 12-24V

Main parameters:

• Power supply: 12-24V AC / DC
• max. current consumption: 30 mA
  
• Memory: 150 hand-held transmitters
  
• Operating temperature: -20°C /+55°C
• Dimensions (WxDxH): 41x30x19mm
• Installation: The receiver is intended for installation in the door control unit. Protection class IP-20

Inputs / outputs:

• Relay outputs (type/number/max. load): NO / 1 / 1A (24V AC / DC)
• Output mode: monostable, approx. 1 sec.

Radio parameters:

• Radio module: digital, integrated and superheterodyne, offers maximum reliability, resistant to radio interference
  
• Coding: 64 bit Keeloq
  
• Modulation/frequency: OOK / 433.92 MHz
• Antenna impedance: 50Ω
• Antenna: Factory made (wire)
  

Functionality:

• Interface: very clear and simple, based on one button with built-in LED diode
• Transmitter configuration: any function button assignment
• Delete entire memory: Yes
• Delete individual transmitters: Yes
• Reading in individual transmitters without access to the receiver: Yes, remote learning

Scope of delivery:

• 1x DTM radio receiver
• 1x connection cable
• 1x cable tie
• 1x operating instructions