DTM MINI R2 868 MHz Roller Shutter Control for Roller Shutter Drive

The MINIR2 868 is a controller designed for use with roller shutter drives equipped with a single-phase 230V AC motor. It enables both remote control and manual control of the roller shutter drive. Thanks to its compact housing, the MINIR2 868 can be easily installed in installation boxes, making it particularly versatile and space-saving.

Highlights

• Control with remote control and with the short-time button
• Programming of remote controls outside the installation
• Flexibility in assigning control functions to remote control buttons

for drives & controls:

• Roller shutter drive

Technical specifications

• Power supply: 230VAC 50 Hz ±10%
• Current consumption: 10mA
• Memory capacity of remote control: 200 remote controls of the DTM868MHz series
• Operating temperature (min./max.): -20°C /+55°C
• Dimensions of the receiver (WxDxH): 46 (68 with mounting brackets) x 46 x 20 mm
• Mounting type: Installation box Φ60
• Weight: 42g
• Output of the drive: 230V AC / 180W
• Input OPEN (Open – Stop): Type NO
• Output CLOSES (CLOSE – STOP): Type NO
• Input STOP: Type NO
• STEP BY STEP input (Open-Stop-CLOSE-Stop): Type NO
• Setting of opening and closing time: 1s to 255s with an accuracy of 1s
• Radio module: Integrated, superheterodyne
• Transmission security: 104-bit IRS
• Dimensions (WxHxD) 46 x 20 x 46 mm
• Type of modulation/frequency: FSK / 868MHz
• Impedance of the antenna output: 50Ω
• Antenna: Wire
• User interface: Hardware interface with five LEDs and two buttons supporting a simple menu
• Function of unique opening and closing: In the input of the manual control STEP BY STEP
• Delay time for sudden direction change: 1s
• STOP / NO STOP function after reversing direction: The ability to reverse the direction of the roller shutter without stopping
• Configuration of the remote control: Ability to assign one of four functions (OPEN, STOP, CLOSED, STEP BY STEP) to each button
• Remote learning of remote controls: Ability to learn remote controls without using the receiver buttons
• Deleting the remote control: The remote control to be deleted must be present

Scope of delivery

• 1x MINIR2 868MHz, controller for roller shutter drive