Becker Centronic EasyControl EC145-II 868 MHZ 5 channel

• 5 channel transmitter with 868.3MHz
• For controlling Centronic compatible devices
• For indoor use
• with LED display
• Enables the programming of 5 freely selectable intermediate positions
• Individual, group or central control
• Metal ring to attach to a key ring

The maximum radio transmission range is up to 15 m in and outside buildings and up to 150 m in the open.

Technical specifications:

• Model: EC145-II
• Frequency: 868.3 MHz
• Channels: 5
• Protection class: IP 20
• Battery: CR2032
• Housing color: black
• Key color: gray

Scope of delivery:

• 1x hand transmitter
• 1x battery
• 1x instruction manual

Learning the radio
1) Teach in the master transmitter
Note Observe the installation and operating instructions for the receiver. The master transmitter is the first transmitter taught into a receiver. In contrast to other learned transmitters, the master transmitter enables, among other things, the setting of the end positions (for drives with integrated radio receiver) and the learning or deletion of further transmitters. Master transmitters can be all transmitters that have a separate UP, STOP, DOWN button and a teach-in button. Operate the programming button on the transmitter with a suitable cylindrical tool (e.g. ballpoint pen).

a) Make recipients ready to learn
? Switch off the power supply of the receiver and switch it on again after 5 seconds. or
? Press the teach-in button or the radio switch on the receiver.
The receiver is now ready to learn for 3 minutes.

b) Teaching in the master transmitter Press the teach-in button of the master transmitter when it is ready to learn until the receiver acknowledges the successful teaching-in. This completes the teach-in process.

2) learn further transmitters
a) Press the programming button on the master transmitter until the receiver acknowledges.
b) Now press the programming button of the new transmitter until the receiver acknowledges.
c) Now press the programming button of the new transmitter to be programmed again.
The recipient acknowledges the successful teach-in.