Amiko HD 9265+

Versatile and powerful digital receiver that meets all your entertainment needs. This receiver is capable of receiving satellite as well as cable and terrestrial signals and offers access to a wide range of TV and radio channels.

Picture quality:
Thanks to support for 4K resolution and HEVC decoding, you can rely on stunning picture quality. Enjoy clear, sharp images and vibrant colors for an impressive viewing experience.

Flexible viewing options:
The Amiko 9265+ Combo has a built-in Conax card reader and a CI+ slot. This allows you to decode your favorite channels with a smart card and or modules from your provider. This makes the device suitable for a wide range of providers and services.
To receive SRG channels, you need a Viaccess module to operate the SRG card.

Connectivity options:
This receiver offers both Ethernet and USB WiFi support (requires a Ralink RT5370 chip), making it easy to connect to the Internet and use features such as YouTube videos, an RSS reader and weather forecasts. The two high-speed USB 2.0 ports allow you to connect external storage devices to record your favorite shows.

Recording and timeshifting:
With the ability to record channels and use the timeshift function, you never have to miss your favorite shows again. You can even connect external storage media to save your recordings.

Advanced tuner and demodulation:
The Amiko 9265+ Combo has both DVB-S/DVB-S2 and DVB-T2/DVB-C tuners, so you can receive satellite as well as cable and terrestrial signals. Thanks to the support of DiSEqC and a wide range of symbol rates and FEC settings, you are flexible when tuning to different channels.

Multimedia functions:
In addition to TV reception, this receiver offers entertainment options such as games, an electronic program guide (EPG), subtitles and teletext support.

Energy efficiency:
The Amiko 9265+ Combo is energy efficient and consumes less than 0.5W in standby mode, making it an environmentally friendly choice.

Key features:

Two tuners for satellite and T2/cable reception
Fast scan and compatible with M7 Canal Digitaal and Joyne
Suitable for 12 volt and 220V with IR eye
Full HD picture quality and H.265 HEVC for effective bandwidth utilization
Compatible with DiSEqC 1.0, 1.1, 1.2 and USALS
1x built-in Conax card reader
1x Common Interface slot CI
Programmable for 6000 channels (TV and radio)
2x high-speed USB 2.0 ports
Ethernet connection and USB WiFi support (Ralink RT5370 chip only)
RSS reader and weather forecast function
Recording of channels on external storage media (optional)
Timeshift support

Technical data
Main processor: Quad-Core 1.4GHz
Flash memory: 8MB
WORKING MEMORY: DDRIII 16-bit 2GB x 2
Input voltage: 12VDC
Power consumption: 24W Max
Standby power consumption: &lt,0.5W

A/V &amp, data input/output:

RCA: CVBS video output, L&amp,R audio output
USB: Two USB 2.0 ports
S/PDIF: Coaxial digital audio or Dolby Digital bitstream output
HDMI: VER1.4, Type A
Ethernet: 10/100M RJ45
IR INPUT: Connection for external IR sensor

Tuner &amp, demodulation:
Tuner type: DVB-S / DVB-S2
Input connector: F-type, female
Signal level: -65 to -25 dBm
LNB power and polarization: Vertical: +13V/+14V, Horizontal: +18V/+19V
Max. Current: 400mA (overload protection)
22KHz audio frequency: 22&plusmn,1KHz
DiSEqC control: Version 1.0, 1.1, 1.2, USALS
Demodulation: QPSK, 8PSK
Input symbol rate: 2-45 Mbps
FEC: 1/2, 2/3, 3/4, 5/6, 7/8, and Auto

Tuner type: DVB-T2/DVB-C
Frequency range: 48~862MHz
RF input level: -80dBm to -20dBm
Antenna output voltage: DC 5V at max. 75mA, overload protection
Demodulation: COFDM 1K, 2K, 4K, 8K (normal and extended), 16K (normal and extended), 32K (normal and extended)
Input symbol rate: 1.0 ~ 7.0Ms/s
Constellations: QPSK, 16QAM, 64QAM, 256QAM (both rotated and non-rotated)
Protection intervals: 1/4, 19/256, 1/8, 19/128, 1/16, 1/32, 1/128
Code rate: 1/2, 3/5, 2/3, 3/4, 5/6

MPEG TS A/V decoding:

Transport stream: MPEG