Universal Aqua Stop Easy Plus for 3/8 and 1/4 inch hoses
Water stopper for Side by Side refrigerators, water filters and osmosis systems.
The professional water stopper protects your home around the clock from any water damage that may occur.
This technology offers you optimum protection! Even the smallest amounts of water are enough and the water stopper interrupts the water supply.
No power connection is required. The water stopper has 3/8 inch connections so that you can easily connect it to any water filter system or side-by-side refrigerator in just one minute.
Built-in water filter systems with 3/8 inch reinforced hose:
Turn off the water. Unscrew the reinforced hose from the water filter and screw it onto the Aquastoper (inlet). Attach one end of the supplied reinforced hose to the outlet of the water stopper and attach the other end to the water filter.
Installation Reverse osmosis 1/4 or 3/8 inch plastic hoses:
Turn off the water. Disconnect the hose of your reverse osmosis, water filter system or refrigerator that leads from your water connection to the system (do not use scissors. Use a sharp knife/cutter to avoid deformation) and insert the two hose ends into the connections/adapters of the water stopper. Place the water stopper (do not lay it down) where the water first comes up after water damage, e.g. on the floor or under the sink).
- Suitable for 1/4" (6.25 mm outer diameter) and 3/8" (9.5 mm outer diameter) plastic hoses or reinforced hoses with 3/8 inch internal thread.
Scope of delivery:
- Aquastoper with 3/8 inch connections (male)
- Three swelling pads (exchange after each contact with water)
- Two plug-in adapters for 1/4 inch plastic hoses (approx. 6.25 mm)
- Two screw adapters for 3/8 inch plastic hoses (approx. 9.5 mm)
- Armored hose 80cm with 3/8 inch connections (female) incl. seals
- Fastening screws 4x