Akerströms Radio receiver from Sesam 800 3-command. Display wall receiver 12-24V AC / DC

Display wall receiver 12-24V

The Sesam 800 receivers are available in three versions: for surface mounting with LCD display, for surface mounting without LCD display and as a smaller device for DIN rail mounting. The alphanumeric LCD display makes it easy to add and remove new transmitters and system users. The recipient
also has a removable memory card for critical systems so that it can be used with a large number of transmitters. Settings of the receiver can be password-protected with a four-digit numerical code in order to make certain functions accessible only to authorized users. Settings and access control can be easily carried out using the keypad on the display receiver.

Highlights:

• 16.7 million unique code types, CRC-16 checksum check, configurable security mode with encrypted user authentication

Technical data of the radio receiver:

• Model: Sesam 800 RXD
• Number of relays: 3 (SPDT)
• Storage capacity: max. 500 transmitters
• Frequency: 869.800 MHz
• Code type: Unique Code
• Power supply 12-24 V AC / DC
• Current consumption: 60 mA (+30 mA after pulling the relay) at 12 V DC
• Current resistance d. Relay contact: NO / NC 8A / 3A 230V AC (resistive load)
• Response time: 50 ms (typ.)
• Power consumption: Max. 5 W
• Degree of protection: IP65
• Temperature range: -25 ° C to + 70 ° C
• Dimensions: 120 x 90 x 51 mm
• Weight: 450g
• Incl. Antenna

Scope of delivery:

• 1x radio receiver 230 V AC 3 commands
• 1x instruction manual