DTM MARK industrial radio receiver 868 MHz 3 channel

MARK is an industrial bidirectional 3-channel radio receiver designed for use with door controls, roller shutters and other automation devices where control pulses are required over long distances. Thanks to the bidirectional communication, it is possible to send a return signal to the transmitter, which is a confirmation of the channel control. The receiver is supplied with 230V alternating current. It is supplied in a surface-mounted housing with IP66 protection for outdoor installation. Dedicated to industrial automation, in halls and warehouses.

Main parameters:

• Power supply: 230V AC, 50Hz
• Memory: 150 hand-held transmitters
  
• Operating temperature: -20°C /+55°C
• Dimensions (WxDxH): 150x190x75mm (housing), 100x140x40mm (circuit board)
  
• Mounting: outdoors or in housings of other devices. Protection class IP66

Inputs / outputs:

• Relay outputs (type/number/max. load): 3 NO type (AC1 = 16A/250V AC; AC15 = 1.5A/240V; AC5 = 0.5kW 240V AC, single-phase motor; DC1 = 16A/24V DC; DC13 = 0.1A/250V)
• Output mode: monostable, approx. 1 sec.

Radio parameters:

• Radio module: analog-digital with extremely low power consumption
  
• Coding: 128bit AES
  
• Modulation/frequency: CSS / 868 MHz
• Antenna impedance: 50Ω
• Antenna: rod antenna, terminals for external antenna connection
  

Functionality:

• User interface: Hardware interface with seven LEDs and three buttons that operate a simple menu
• Handheld transmitter configuration: Possibility to assign each of the three receiver channels to each remote control of the CSS system
• Confirmation of channel setting: thanks to bidirectional communication, the receiver sends the signal back to the transmitter and confirms the channel setting
• Receiver management: with the help of buttons and by connecting to a computer

Scope of delivery:

• 1x DTM radio receiver in housing
• 1x antenna
• 1x operating instructions