DTM Radio receiver Nano SET Duo 12-24 Volt 868 MHz

Would you like to operate revolving and garage doors with different drives with just one hand transmitter?

In the case of different drives, such as a courtyard entrance gate and your garage, we recommend that you convert your gate systems to one system so that you can control both systems with just one hand transmitter.

The solution:

In addition to your existing system, a 1-channel radio receiver is connected to the push-button input of the door controls via the pulse input. The new 2-channel hand-held transmitter is then taught-in at the gate (1) and gate (2). Both systems can thus be used together in dual operation. This conversion is particularly useful with old systems, as these hand-held transmitters are no longer state-of-the-art, e.g. the frequency is outdated and prone to failure in the weather, or the hand-held transmitter is too bulky. This is remedied by new, innovative systems with a new frequency, elegant and inexpensive hand-held transmitters.

The Nano is a universal 1-channel radio receiver from DTM, with a voltage of 12-24 V, which works in the DTM 868 MHz system. The main application of the radio receiver is in the area of gate control for entrance and garage doors. It is characterized by its compact size, easy operation and very good radio parameters.

Highlights:

• small size
• easy operation
• Superheterodyne receiver
• Relay output NO
• Power supply: 12-24V AC / DC
• max.current consumption: 60 mA
  
• Memory: 200 hand-held transmitters, each with its own ID
  
• Operating temperature: -20 ° C / + 55 ° C
• Dimensions: 48 (64 with handles) x42x22mm
• Installation: The receiver is intended for installation in the door control or in the room. Protection class IP-20
• Relay outputs (type / number / max. Load): NO / 1 / 1A (24V AC / DC)
• Output modes: monostable, approx. 1 sec.

Radio parameters:

• Radio module: digital, integrated and superheterodyne, offers maximum reliability, resistant to radio interference
  
• Coding: 104-bit IRS
  
• Modulation / frequency: ASK / 868 MHz
• Antenna impedance: 50?
• Antenna: Connection terminals for external antenna

Functionality:

• Interface: very clear and simple, based on a button with a built-in LED diode
• Transmitter configuration: any function-key assignment
• Erase entire memory: Yes
• Deleting individual channels: Yes
• Reading in individual transmitters without access to the receiver: Yes, remote learning

Hand transmitter Victory:

• Model: Victory - 2P
• Frequency: 868 MHz
• Channels: 2
• Battery: 2x CR 2016 - 3V
• Housing: thermoplastic
• Key color: black
• Size: 61 x 32 x 15 mm
• Programming aid: Keelog

Scope of delivery:

• 2x DTM radio receivers 1 channel 12-24 volts
• 5x handheld transmitter Victory 2P 2 channel 868 MHz
• 2x wire antenna
• 2x instruction manual