Rode Microphones Stereo VideoMic Pro Rycote

RODE Stereo VideoMic Pro R, stereo condenser microphone for video cameras, including hotshoe mount. Ultra-compact stereo microphone for camera mounting.With its design, the SVMPR is the perfect partner for modern DSLR cameras and all sorts of camcorders. If required, a Rumpell filter can be switched on at the back to avoid low-frequency interfering signals, such as a passing tram or dull noises to suppress from the neighbor. The connection to the camera is made via a 3.5mm stereo plug. Dual Rycote® Lyre®, thermoplastic vibration mount without loss or wear parts, effective decoupling of disturbing structure-borne noise, two 1/2 "condenser capsules arranged at 90 ° to the left and right (XY), broadcast quality broadcasting, switchable high-pass filter (lump filter ), switchable -10 dB pre-attenuation for very loud signals, switchable +20 dB boost for moderate to quiet sound sources, Kevlar®-reinforced connection cable with 3.5 mm jack plug (TRS), integrated 3/8 "thread to the alternative tripod and Tonangelmontage Power supply: 9 V block battery (not included). Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter Capsule 0.50 "Input Direction End Transmission Range 40Hz - 20kHz Output Impedance 200 Boundary Pressure 134dB (@ 1kHz, 1% distortion at 1k) Sensitivity -38.0dB re 1 Volt / Pascal (12.60mV @ 94dB SPL) +/- 2 dB @ 1kHz Noise (A-weighted) 18dB-A Noise (A-weighted) 116gm Dimensions 134mmH x 80mmW x 115mmD Output Mini Jack Output (3.5mm) Package contents: - Stereo VideoMic Pro Rycote Stereo On-Camera Microphone