Metabo Dry tile diamond core bit set, 7-piece, M 14

Metabo tile diamond core bit set Dry, 7-piece, M 14

• M 14 thread for use on angle grinders
• Long service life and fast drilling progress thanks to vacuum-brazed diamonds
• Easy removal of the drill core thanks to lateral recesses
• No extra cooling required. Ø 6-14 mm also have an integrated kerosene emulsion for better cooling. When drilling consecutive holes, it is recommended to cool the crown briefly with water after each hole!
• The recommended working length is the thickness of the tile / porcelain stoneware / granite slab. Usually max. 2 cm. Granite slabs / worktops can be drilled up to 5 cm. In this case, the crown should be pulled out of the drill hole several times so that it cools down briefly!
• Important: Do not drill into the substrate if the material is laid!
• Maximum working speed: 80 m/s
• Set consisting of: 2 x Ø 6 mm, 2 x 8 mm, 1x each 10 mm, 12 mm, 14 mm

M 14 thread for use on angle grinders
Long service life and fast drilling progress thanks to vacuum-brazed diamonds
Easy removal of the drill core thanks to lateral recesses
No extra cooling required. Ø 6-14 mm also have an integrated kerosene emulsion for better cooling. When drilling consecutive holes, it is recommended to cool the crown briefly with water after each hole!
The recommended working length is the thickness of the tile / porcelain stoneware / granite slab. Usually max. 2 cm. Granite slabs / worktops can be drilled up to 5 cm. In this case, the crown should be pulled out of the drill hole several times so that it cools down briefly!
Important: Do not drill into the substrate when the material is laid!
Maximum working speed: 80 m/s
Set consisting of: 2 x Ø 6 mm, 2 x 8 mm, 1x each 10 mm, 12 mm, 14 mm