DTM Micro V2 433 MHz 2 channel radio receiver

The 2-channel radio receiver Micro2 433 from DTM with a voltage of 12-24V AC / DC is mainly used in the control of entrance and garage doors, shutters, lighting and alarm systems. Management is carried out via the MEMO programmer.

• ABS housing with antenna
• LEDs indicate the current status
• The switch-on time can be regulated
• Power supply 12 -24V AC / DC
• Compatible with all handheld transmitters of the DTM 433 MHz series
• Modulation: FSK
• the highest level of security against copying
• intelligent adaptation to different radio conditions

Technical specifications:

• Power supply: 12 - 24V AC or DC
• Max. Current consumption: 100mA with relay
• Memory: 200 hand-held transmitters, each with its own ID
• Operating temperature: -20 ° C / + 55 ° C
• Dimensions: 98 (+ handle 40) x79x33 mm
• Mounting: ABS housing
• Weight: 125g
• Relay outputs (type / number / max. Load): NO or NC / 2 / 1A 24V AC or DC
• Output modes: monostable, bistable or short-term
• Switch-on time in monostable mode adjustable: 0.5 sec., 1 to 127 sec., Resolution 1 sec. 1 min. To 127 min., Resolution 1 min.
• Coding: 64-bit Keeloq®
• Modulation / Frequency: FSK / 433.92 MHz
• Antenna Impedance: 50?
• Antenna: rod antenna, connection terminals for external antenna
• Cell memory: contains all transmitter data and settings
• Configuration memory: non-volatile memory
• Protection against critical moments: Watch Dog, Power On Reset
• User interface: 7 LED diodes and 2 buttons
• Transmitter configuration: any function-key assignment
• Clear entire memory: Yes
• Deletion of individual channels: Yes
• Reading in individual transmitters without access to the receiver: Yes, (remote learning)
• Service lockout: The possibility of deactivating the transmitters for a certain period of time
• Management via the radio receiver: via buttons and via the MEMO programmer