Protection and refreshing care for all hardwood garden furniture
Penetrates deeply, leaves no film, effective protection against moisture and UV rays, repels water and dirt, refreshes old and greyed wood surfaces, produces even, silky surfaces, easy to apply, revives the natural wood grain.
Area of application:
For old and new garden furniture such as tables, chairs, benches etc. made of hardwood. For all hardwoods, e.g. Afzelia, Afromosia, Bangkirai, Oak, Frameri, Ilomba, Iroko, Jatai, Kaori, Larch, Makoré, Meranti, Oregon Pine, Radiata Pine, Red Cedar, Red Narra, Redwood, Robinia, Sapelli, Sipo or Teak.
Processing:
Brush or wipe off dust and dirt from furniture. Clean furniture (e.g. with soapy water), allow to dry and sand lightly with sandpaper or sanding fleece if necessary. Do not inhale sanding dust, wear a dust mask. Shake and stir Xyladecor Teak Furniture Oil well before use. Apply thinly and evenly with a clean, soft cloth. Ensure good ventilation during application. Allow the 1st coat to dry for at least 5 hours. Then apply 1 further coat. To achieve particularly beautiful surfaces on old hardwood, a 3rd coat is recommended.
Coverage:
Approx. 20 m2 with 1 coat, depending on the type of wood and absorbency. (spray may vary)
With 2 coats, 0.75 l is sufficient for approx. 10 m2.
- Weather protection
- Even, silky surface
- Penetrates deeply
- Low odor