Heroal SET: MT4 + Recipient Dickert E22 + Dickert 868 Sender

The set consists of the following components:

Controller - MT-4

• Power supply: 230 V 50 Hz +/- 10%
• Power consumption: max. 10 VA
• Dimensions (L x W x H): approx. 180 x 130 x 62 mm
• Protection class: IP 65
• Operating temperature: -10 °C - +55 °C
• Storage temperature: -20 °C - +70 °C
• Cable entries: 5 x PG 11

Receiver - Dickert E22

• Receiving frequency: 868.300 MHz or 915.300 MHz
• Receiving channels: 4 channel
• Coding type: 12Bit, 18Bit, or Keeloq, self-learning, max. 23 codes (transmitter buttons) can be learned
• Supply voltage: 12-24V AC/DC
• Remote learning via "QuickLearn"
• Operating modes:* Pulse, impulse, targeted ON/OFF
• Output: 4 relays, each with 1 normally open contact, potential-free, max. 30V / 0.5A (ohmic load per output)
• Operating temperature: --20° C to +50° C at 30% to 80% relative humidity
• Dimensions: 87 mm x 62 mm x 27 mm, plastic housing IP20

Hand transmitter - Dickert S5Q

Note: The "Dickert Hand Transmitter S5Q 868 MHz 2 Channel Keeloq" is backward compatible!
The S5Q-..A..K00 operates according to the modern KeeLoq procedure. With each activation, a new code is calculated. Under normal use, it takes over 20 years for a code to repeat!

• With keychain, “ultra” light, top design
• Transmission frequency: 868.300MHz; Amplitude Shift Keying ASK not cloneable
• Transmission channels: 2 channel
• K00 version: KeeLoq, Hopping / changing code
• Transmission range: up to 50 m in open field
• Operating voltage: 3 V (1x CR2032 lithium button cell)
• Dimensions: 50 mm x 24 mm x 12 mm, without key ring
• Weight: approx. 12 g including battery and packaging

• Please note the following for Keeloq hand transmitters:

  the Dickert hand transmitter ...K00 is only compatible if your current hand transmitter also has the designation ...K00. If you have a hand transmitter with the designation ...K01, K02, K03, K04, or K05, the ...K00 is not compatible, as this hand transmitter has a different Keeloq. However, you can delete your radio receiver and learn the ...K00 into your system. However, your existing hand transmitters with the designation ...K01-K05 will no longer work.

Contents of the set:

• 1x Hand transmitter Dickert S5Q
• 1x Controller MT4
• 1x Receiver Dickert E22
  
  
• each with corresponding operating instructions