Dickert Radio receiver from radio receiver E25Q 40 MHz AM 1 channel 230 volts, E25Q40A100

1 channel radio receiver E25Q 40.685 MHz AM 230 volts

With a maximum of 4 potential-free, powerful relays in the output, there are many possible uses, e.g. for switching lighting, alarm systems, fountains, awnings, shutters, garage doors, etc. An automatic switch-off time can be set for each output, ideally suited as a staircase time switch. The standby consumption is less than 0.5 watts.

Using the additional card? QuickLog25? the learned transmitter codes can be saved or the E25Q can be expanded to an awning / roller shutter control.

Highlights:

• 1 duct version
• Distance learning through? QuickLearn?
• Operating modes: pulse, current surge, targeted ON / OFF
• ? Auto-Off? adjustable from 1 second to 18 hours
• Input for external button
• Relay output, potential-free
• Standby consumption <0.5 watt
• Additional card QuickLog (optional)
• Save transmitter codes
• Awning / roller shutter control

Technical data of the radio receiver:

• Receiving frequency: 40.685 MHz amplitude modulation AM
• Receiving channels: 1 channel
• Coding type: 12Bit, 18Bit, or Keeloq, self-learning, max. 100 codes (transmitter buttons) can be taught
• Supply voltage: 230 V, ± 10% 50 Hz
• Output: 1 relay, 1 changeover contact each, potential-free, max. 250V AC 8 A or max. 30V DC 8A (resistive load per output)
• Connected load: max.2,000VA
• Operating temperature: -20 ° C to + 50 ° C at 30% to 80% rel. humidity
• Dimensions: 125 mm x 125 mm x 52 mm, plastic housing IP54
• Weight: approx. 0.6 kg including packaging

Scope of delivery:

• 1x Dickert E25Q radio receiver 1 channel supply voltage 230 volts
• 1x Dickert radio board HAM40-50 / 51 40.685 MHz AM
• 1x wire antenna approx. 330mm
• Operating instructions (multilanguage)